Wooden Cat Pen Holder
Basic Information
| MachineLX1 |
| MaterialWood |
| Size354 x 401 mm |
| Material Information3mm Basswood Plank |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
As shown in the picture, paste the four wooden boards of the cat together to form two pieces. . And the five wooden pieces are spliced together, and glue is filled in the gaps to make it more secure. The wooden cat pen holder is ready.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
