Open in LDS
Christmas Greeting Card
How-to
LaserPecker
2023/12/28 19:25 10
Make a Christmas card for your friend.
Basic Information
| MachineLX1 |
| MaterialPaper |
| Size210 x 303 mm |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing the green and red paper on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Note that If you're using different materials, remember to adjust the parameters accordingly.
Settings 1
| Engraving MethodLine |
| MaterialPaper |
| Power100% |
| Depth10% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Lay the two pieces flat and glue them together, and the greeting card is ready. Go ahead and write to your friend.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Christmas Greeting cards.lp2
Open in LDSDownload
6
Christmas
Greeting Card
