Open in LDS
Shadow Lamp
How-to
LaserPecker
2023/12/01 00:25 10
Let's use the machine to make a shadow lamp.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size162 x 97 mm |
| Material Information3mm basswood plank |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a 3mm basswood plank on the cutting pad. Open the file, connect the LX1， adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level3 |
| Module Type20 W 450 nm |
Step 2
As shown in the picture, after painting the color and gluing the wood blocks together, place the candle at the center of the bottom, and the shadow lamp is ready.
Step 3
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Shadow Lamp.lp2
Open in LDSDownload
5
Black Friday
Decorative Painting
My Handmade Daily
