Open in LDS
Beer Keychain
How-to
LaserPecker
2023/12/15 12:03 5
Make a beer keychain
Basic Information
| MachineLP4 |
| MaterialWood |
| Size29 x 29 mm |
| Production Time3 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a wooden keychain on the cutting pad. Open the file, connect the machine，adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodFill |
| MaterialWalnut plank |
| Resolution2 K |
| Power1% |
| Depth5% |
| Pass2 |
| Module Type10 W 450 nm |
Step 2
So you get a beer keychain.
Step 3 Note
If you're using different materials, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Beer Keychain.lp2
Open in LDSDownload
6
Keychain
Beer
