Open in LDS
Halloween Cards
How-to
LaserPecker
2023/12/15 11:16 17
Let's make Halloween cards!
Basic Information
| MachineLP4 |
| MaterialMetal |
| Size53 x 43 mm |
| Production Time15 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file, place the black card on the base. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodFill |
| MaterialSteel |
| Resolution2 K |
| Power100% |
| Depth10% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 2
In this way, you will get a series of Halloween cards, which can be sent to your friends.
Step 3 Note
If you're using different materials, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
8
Halloween
