Turkey Ornament
Basic Information
| MachineLX1 |
| MaterialWood |
| Size182 x 86 mm |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file, click this cutting button to place the layers in the line model, except for the perfectly round layer, into the to cut model. This allows you to cut the turkey tail while drawing a line in the middle.
Click on the eye button to hide the turkey's head and body first. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power100% |
| Depth3% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Settings 2
| Engraving MethodCut |
| MaterialBasswood plank |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
After the cutting in the previous step is completed, unhide the head and body layers, and hide the tail and mouth layers. Switch to a 3mm black walnut wood board, repeat the above operation, and cut the turkey head and body down. After assembly, you will have a turkey ornament.
Settings 1
| Engraving MethodCut |
| MaterialBlack walnut |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 3 Note
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
