Open in LDS
Spooky Tic-Tac-Toe
How-to
LaserPecker
2023/12/11 19:53 11
Let's make a wooden spooky Tic-Tac-Toe.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size228 x 138 mm |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a 3mm basswood plank on the cutting plate. Open the LP2 file, adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Stick two large square plates together, paint each small piece of wood with a dark color, and find your partner to start the game.
Step 3 Note
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Spooky Tic-Tac-Toe.lp2
Open in LDSDownload
6
Wooden
Tic-Tac-Toe
Spooky
