Open in LDS
Puppy Decoration
How-to
LaserPecker
2023/12/21 14:14 7
Let's make a wooden dog decoration.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size157 x 280 mm |
| Material Information3mm Basswood plank |
| Production Time40 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving. Repeat the operation of cutting the remaining dog layers.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Glue the dogs in order, add a frame, and you can hang them in the room for decoration.
Step 3 Note
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
13
Decoration
Dog
