Open in LDS
Christmas Tree Ornaments
How-to
LaserPecker
2023/12/08 20:05 36
With Christmas just around the corner, it's time to prepare festive decorations using the LX1 engraving machine. Follow these steps to create your Christmas tree masterpiece.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size273 x 96 mm |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type10 W 450 nm |
Step 2
String it with thin string and hang it on the Christmas tree.
Step 3 Note
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Christmas Tree Ornaments.lp2
Open in LDSDownload
9
Christmas
Christmas Tree
Ornaments
