Open in LDS
Skull Earrings
How-to
LaserPecker
2023/12/08 20:03 19
Let's make a pair of skull earrings together.
Basic Information
| MachineLP4 |
| MaterialWood |
| Size62 x 30 mm |
| Production Time3 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a 1.5mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power60% |
| Depth70% |
| Pass1 |
| Module Type10 W 450 nm |
Step 2
After painting your favorite color, assemble the wood pieces with earring accessories, and you'll have a pair of skull earrings.
Step 3 Note
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Skull Earrings.lp2
Open in LDSDownload
4
Earrings
Halloween
Skull
