Open in LDS
Christmas Tree Decoration
How-to
LaserPecker
2023/12/08 19:58 14
With Christmas coming, it's time to make a Christmas tree decoration using the LX1 engraving machine.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size211 x 196 mm |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type10 W 450 nm |
Step 2
Follow the steps shown in the pictures to assemble the wooden pieces and you will end up with a complete Christmas tree decoration.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Christmas Tree Tecoration.lp2
Open in LDSDownload
7
Christmas
Christmas Tree
Decoration
