Grandparents’ Blessing: Engraved Wooden Plaque with Family Portrait
基本信息
| 机器LP5 |
| 材质金属/木质 |
| 尺寸140 x 178 mm |
| 雕刻难度 |
操作说明
步骤 1
Cut Wooden plaque to size. For this effort it was 5.5 inches wide by 7 inches tall. Position the Bible quote at the top of the wooden plaque. leaving enough room at the bottom for your portrait.
After bible verse is burned open a new project for the portrait. I did 2 layers for this. One the family portrait engraved as a picture.
Next I imported a Silouhette of the family portrait. I did this in Gimp setting a threshold under color settings. You should be able to do the same if you have another photo editing software. I have instruction on how to do this in my coin how-to project found here:
Import the silouhette image into project and select trace image. You should now get only the outline of the image. Place it around your photo layer so as to outline the whole image. This will cut out your image once done engraving it.
设置 1
| 雕刻方式线条雕刻 |
| 工艺材质木质 |
| 功率55% |
| 深度25% |
| 雕刻次数3 |
| 模块类型20W 450nm |
设置 2
| 雕刻方式图片雕刻 |
| 工艺材质金属 |
| 分辨率2 K |
| 功率17% |
| 深度2% |
| 雕刻次数1 |
| 模块类型20W 1064nm |
| 激光频率60 |
| 其他参数Aluminum, black coated that came with sample material pack |
设置 3
| 雕刻方式切割雕刻 |
| 工艺材质金属 |
| 功率100% |
| 深度90% |
| 雕刻次数6 |
| 模块类型20W 1064nm |
| 激光频率26 |
| 其他参数Aluminum, black coated that came with sample material pack |
