Grandparents’ Blessing: Engraved Wooden Plaque with Family Portrait
基本情報
| 機器LP5 |
| 材質金属/木材 |
| サイズ140 x 178 mm |
| 彫刻の難易度 |
操作説明
ステップ 1
Cut Wooden plaque to size. For this effort it was 5.5 inches wide by 7 inches tall. Position the Bible quote at the top of the wooden plaque. leaving enough room at the bottom for your portrait.
After bible verse is burned open a new project for the portrait. I did 2 layers for this. One the family portrait engraved as a picture.
Next I imported a Silouhette of the family portrait. I did this in Gimp setting a threshold under color settings. You should be able to do the same if you have another photo editing software. I have instruction on how to do this in my coin how-to project found here:
Import the silouhette image into project and select trace image. You should now get only the outline of the image. Place it around your photo layer so as to outline the whole image. This will cut out your image once done engraving it.
設定 1
| 彫刻方法Line |
| 加工素材Wood |
| 電力55% |
| 深さ25% |
| 彫刻回数3 |
| モジュールタイプ20W 450nm |
設定 2
| 彫刻方法Picture |
| 加工素材Metal |
| 解像度2 K |
| 電力17% |
| 深さ2% |
| 彫刻回数1 |
| モジュールタイプ20W 1064nm |
| レーザー周波数60 |
| その他のパラメータAluminum, black coated that came with sample material pack |
設定 3
| 彫刻方法Cut |
| 加工素材Metal |
| 電力100% |
| 深さ90% |
| 彫刻回数6 |
| モジュールタイプ20W 1064nm |
| レーザー周波数26 |
| その他のパラメータAluminum, black coated that came with sample material pack |
