Christmas Star Cardboarad
基本信息
| 机器LP2 Plus |
| 材质Cardboard |
| 尺寸80 x 80 mm |
| 材料信息Standard recycled cardboard from cereal box. Thickness: 0,40mm |
| 雕刻难度 |
操作说明
步骤 1 First Star
First, position the images as shown in the attached image.
The cut line and fold line must be centered.
Then, insert the artwork in the center.
Now, hide the cut line and assign the settings to the line and the image as follows.
Place the cardboard on the laserpecker base and add tape to secure it to the base.
Preview the laserpecker design, then laser it.
After engraving, hide the fold line and the artwork, then show the cut line and assign the cutting parameters.
Preview the laserpecker, then laser it.
Fold the cardboard along the fold lines.
设置 1
| 雕刻方式图片雕刻 |
| 工艺材质Cardboard |
| 分辨率1 K |
| 功率70% |
| 深度50% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数Assign this setting to the picture |
设置 2
| 雕刻方式线条雕刻 |
| 工艺材质Cardboard |
| 功率70% |
| 深度50% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数Assign this parameter to fold lines |
设置 3
| 雕刻方式线条雕刻 |
| 工艺材质Cardboard |
| 功率100% |
| 深度80% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数Assign this parmeter to cut cardboard |
步骤 2 Second Star
First, position the images as shown in the attached image.
The cut line and fold line must be centered.
Then, insert the artwork in the center.
Now, hide the cut line and assign the settings to the line and the image as follows.
Place the cardboard on the laserpecker base and add tape to secure it to the base.
Preview the laserpecker design, then laser it.
After engraving, hide the fold line and the artwork, then show the cut line and assign the cutting parameters.
Preview the laserpecker, then laser it.
Fold the cardboard along the fold lines.
设置 1
| 雕刻方式图片雕刻 |
| 工艺材质Cardboard |
| 分辨率1 K |
| 功率70% |
| 深度50% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数Assign this setting to the picture |
设置 2
| 雕刻方式线条雕刻 |
| 工艺材质Cardboard |
| 功率70% |
| 深度50% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数Assign this setting to the fold lines |
设置 3
| 雕刻方式线条雕刻 |
| 工艺材质Cardboard |
| 功率100% |
| 深度80% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数Assign this setting to cut lines |
步骤 3 Glue the Element
Add some glue or double-sided tape on the first and second star like the image, then assemble the two star.
Add a string to the star and position to the Christmas Tree.
Enjoy!
设计文件
建议使用V2.5.1版本以上软件
