Coin Pressing Mold
基本信息
| 机器LP5 |
| 材质金属 |
| 尺寸38 x 38 mm |
| 制作时间140 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Since embossing files are often large, it's recommended to use a USB flash drive for 3D Grayscale Embossing. To minimize waiting time, import the .lpb format file onto a USB flash drive beforehand.
1. Download the image or the .lp2 file and import it into your LDS PC.
2. Set your usual 3D embossing parameters (power, depth, frequency, resolution, etc.).
3. Export as .lpb file and save it to the flash drive.
4. Insert the flash drive into the machine.
5. Go back to the PC software and click the flash drive icon. (Alternatively, you can connect the LP5 to the LDS mobile app for embossing.)
7. Find the file and preview it.
8. Setting up a small fan right next to the cutting plate,and aiming it directly at the surface of your material. (This helps prevent dust residue from settling on the surface, beccause that residue can negatively affect your results.)
9. Engrave it on your material.
Note:
Make sure to place the .lpb file in the "LaserPecker" folder on your USB flash drive so it can be easily found by the device.
Engraved designs must be mirrored for proper stamping.
设置 1
| 雕刻方式图片雕刻 |
| 工艺材质金属 |
| 分辨率2 K |
| 功率100% |
| 深度30% |
| 雕刻次数254 |
| 模块类型20W 1064nm |
| 激光频率30 |
步骤 2
During the engraving process, an oxidation reaction may occur on the metal surface, often causing it to turn black. After the engraving is complete, polish the surface using a bench grinder, adjusting the angle frequently to achieve a smooth and uniform finish.
步骤 3
Using a stamping press, the finished coin can transfer clear designs onto gold-colored foil sheets.
