在LDS中打开
Engraved My LaserPecker USB Drive - Where I Keep All My Projects
操作方法
Rovghall
United Kingdom2025/06/05 07:15 17
This pen drive came included with my LaserPecker machine, and I use it to store all my engraving projects. I decided to give it a personal touch by engraving the LP logo on it, simple, clean, and functional.
基本信息
| 机器LP5 |
| 材质金属 |
| 尺寸24 x 24 mm |
| 制作时间2 分钟 |
| 雕刻难度 |
操作说明
步骤 1
How to do it:
- Open the LaserPecker software and go to the left sidebar - click on the Clipart icon. From there, select the LaserPecker logo (as shown in the first image).
- Then, go to the top Edit tab and click on Auto Cropping, confirm with OK.
- Insert the engraving values exactly as shown in the image (power/speed/lines).
设置 1
| 雕刻方式图片雕刻 |
| 工艺材质金属 |
| 分辨率2 K |
| 功率15% |
| 深度8% |
| 雕刻次数1 |
| 模块类型20W 1064nm |
| 激光频率26 |
步骤 2 Place and align the USB Drive properly on the base of your LaserPecker
How to do it:
1. Place the USB Drive on the base of your LaserPecker machine.
2. In the software, click Preview to project the blue outline onto the USB area.
3. Adjust the USB position until the blue preview lines match the area
4. Once it's aligned correctly, you're ready to engrave!
3
laserpecker
usb drive
custom
