在LDS中打开
Easily Distracted by Books – Laser Engraved Coin
操作方法
Rovghall
United Kingdom2025/06/04 07:43 12
The design “Easily Distracted by Books” was engraved onto a metal coin using the LaserPecker LP5, with great precision and clarity.
A perfect little keepsake for readers, writers, or anyone who can’t resist a good story. Use it as a collectible, a bookmark weight, or a gift for your favorite bookworm!
基本信息
| 机器LP5 |
| 材质金属 |
| 尺寸29 x 34 mm |
| 制作时间5 分钟 |
| 雕刻难度 |
操作说明
步骤 1
How to Do It:
The coins I'm using have a 40mm diameter, but as you can see in the settings, I scaled the design down to 29mm x 34mm.
This was intentional - I wanted the engraving to stay within the inner
surface of the coin and not overlap the raised outer edge.
- Open the LaserPecker software and drag the coin design file into the workspace.
- Resize the image to 29mm x 34mm to ensure it fits neatly inside the coin's inner area.
- Apply the engraving settings as shown in the reference image.
- Adjust the coin’s position until the blue preview lines match the inner circle of the coin — this ensures the engraving will stay within the
inner area only. - Ready to engrave!
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质金属 |
| 分辨率2 K |
| 功率45% |
| 深度30% |
| 雕刻次数5 |
| 模块类型20W 1064nm |
| 激光频率35 |
1
brass coin
coin
book lover
