Mother's Day heart insert keyring
基本信息
| 机器LP5 |
| 材质金属/木质 |
| 尺寸100 x 100 mm |
| 材料信息Keyrings from Temu, brass cut from plaques from Amazon |
| 制作时间30 分钟 |
| 雕刻难度 |
操作说明
步骤 1 Cut the brass insert
Align the brass and stabilise on the cutting plate. The width and height of the heart is 18mm.
Use the metal cutting setting and ensure the preview is correct. Set the engraving parameters and start cutting. You may need to repeat the process to enable a clean cut.
Optional - if you want the heart engraved also, use the clipart button and use the heart clipart provided by LaserPecker. This will align perfectly onto the heart.
设置 1
| 雕刻方式金属切割 |
| 工艺材质金属 |
| 功率100% |
| 深度10% |
| 雕刻次数50 |
| 模块类型20W 1064nm |
| 激光频率26 |
| 其他参数0.4mm brass |
步骤 2 Make the recess for the brass
Hide the outer hearts and text of the file, and have only the filled heart visible. Ensure it is correctly aligned to the centre of the keyring. Use the settings provided to produce the 18mm x 18mm heart recess. The amount of passes will depend on the hardness of the wood and the thickness of the metal.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质木质 |
| 分辨率2 K |
| 功率27% |
| 深度33% |
| 雕刻次数20 |
| 模块类型20W 450nm |
步骤 3 Add the border on the front and the text and border on the rear. Insert the brass insert.
Align the border to the keyring, ensuring the preview is correct on the keyring. Engrave this side.
Once this side is complete, turn it over and engrave both the border and text. Once again ensure alignment is correct.
That's now all complete. Finally insert the brass heart into the keyring. While it fit perfectly secure for me, you may require a small drop of super glue.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质木质 |
| 分辨率2 K |
| 功率20% |
| 深度33% |
| 雕刻次数4 |
| 模块类型20W 450nm |
