在LDS中打开
Hand of the Oni – Aluminum Engraving
操作方法
Rovghall
United Kingdom2025/05/16 18:17 9
Engraved and laser-cut this piece on 1mm anodized aluminum using my LaserPecker LP5. The artwork features an Oni mask surrounded by flowers, emerging from an open hand holding a butterfly. You can use this piece as a keychain, stick it on your fridge, or as a decorative accent anywhere you like.
基本信息
| 机器LP5 |
| 材质金属 |
| 尺寸63 x 124 mm |
| 材料信息1mm anodized black aluminum |
| 制作时间30 分钟 |
| 雕刻难度 |
操作说明
步骤 1 How to Make It
How to Make It:
- Open the LaserPecker software.
- Upload the design and resize it to your preference.
- Go to the “Effect” tab, select “Dithered”, and invert the image.
- Apply the settings for "Picture" as shown in the example image.
设置 1
| 雕刻方式图片雕刻 |
| 工艺材质金属 |
| 分辨率2 K |
| 功率12% |
| 深度1% |
| 雕刻次数1 |
| 模块类型20W 1064nm |
| 激光频率26 |
步骤 2 Cutting Steps
Cutting Step:
- Go to the top menu and click on “Outline”. Set the margin between the design and the cut — for this piece, I used a 2mm offset.
- In the “Line” section/layer, apply the cutting settings as shown in the reference image.
- Ready to engrave and cut!
0
装饰画
dark art
Cutting
Oni art
