Christmas Woodland Coaster Set

操作方法

Crafted Curiosity

United States2024/11/13 23:32 103

Set of 4 Slate Coasters - Christmas Woodland Designs

基本信息

机器LP4

材质石材/Slate

尺寸101 x 101 mm

材料信息Slate Coasters purchased from Amazon

制作时间45 分钟

雕刻难度

固件版本 <655

操作说明

步骤 1 Set image to 2k and invert image before engraving

DO NOT Pre-Treat or Sand Coasters beforehand. (Coating Coasters Before Engraving Releases Fumes that are Seriously Harmful to your Health) Place Coasters on Engraving Plate and Size the Viewing Box area just enough to go over the edge of the coaster. Make sure each image is inverted and select dithering. Each coaster will take roughly an hour due to the amount of detail and shading. After you're finished engraving spray coat coasters with Mod Podge Matte clear acrylic sealer to achieve my exact results. All image files are marked by name. (Fox, Deer, Santa, and Racoon)

FOR LP2 (5w Diode Laser): Use 100% Power and 5% Depth, 1 Pass

设置 1

雕刻方式图片雕刻

工艺材质石材

分辨率2 K

功率100%

深度60%

雕刻次数1

模块类型2 W 1064 nm