Eternal Love
基本信息
操作说明
步骤 1 Set-up fixture for engraving the tile
Clean the tile with alcohol. Use two of the L shaped brackets to hold the ceramic tile firmly in place, but arranged so that the tile can be removed and replaced in EXACTLY the same location.
步骤 2 Engrave Stem
Open TRI COLOR ROSE in Design Space.
Hide all but the stem, and pre-view.
Mark the outline of the preview with a felt tip pen.
Remove the tile, coat the area inside the outline with two coats of TiO2, applied with a soft brush and let dry.
Replace the tile in the fixture. Set the engraving parameters to 50% power, depth 88, and engrave the stem (black)
Remove the tile, and wash off the excess TiO2
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质陶瓷 |
| 分辨率1 K |
| 功率50% |
| 深度88% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数TiO2 solution, 1 part TiO2, 1 part School Glue, 3 parts water |
步骤 3 Rose Petals
Open TRI COLOR ROSE in Design Space.
Place the tile in the fixture such that it is in EXACTLY the same location
Hide all but the rose petals, and pre-view.
Mark the outline of the preview with a felt tip pen.
Remove the tile, coat the area inside the outline with a coat of copper oxide, applied with a soft brush and let dry.
Replace the tile in the fixture. Set the engraving parameters to 39% power, depth 89, and engrave the petals (copper)
Remove the tile, and wash of the excess Copper Oxide
NOTE: If there are unacceptable brush mark in the engraved image, apply another THIN coat of copper oxide and repeat.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质陶瓷 |
| 分辨率1 K |
| 功率39% |
| 深度89% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数Copper Oxide Solution, 1 part Copper Oxide, 1 part School Glue, 3 parts water |
步骤 4 Green Glaze and Blue text
Open TRI COLOR ROSE in Design Space.
Place the tile in the fixture such that it is in EXACTLY the same location
Hide all but the leaves, and pre-view.
Mark the outline of the preview with a felt tip pen.
Hide all but the text, and pre-view
Mark the outline of the preview with a felt tip pen.
Remove the tile, coat the area inside the leaves outline with a VERY THIN coat of green glaze, applied with a soft brush and let dry.
Coat the area of the text outline with two coats of Cobalt oxide solution, letting dry between coats.
Hide all but the leaves, and engrave 89D, 6P
Hide all but the text, and engrave 90D, 39P
Remove the tile, and wash off the glaze and cobalt oxide with water.
FINISHED!!
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质陶瓷 |
| 分辨率1 K |
| 功率6% |
| 深度89% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数SAX Ivy Green Glaze from Amazon |
设置 2
| 雕刻方式填充雕刻 |
| 工艺材质陶瓷 |
| 分辨率1 K |
| 功率6% |
| 深度89% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数SAX Ivy Green Glaze from Amazon |
设置 3
| 雕刻方式填充雕刻 |
| 工艺材质陶瓷 |
| 分辨率1 K |
| 功率39% |
| 深度90% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数Cobalt Oxide Solution, 1 part Copper Oxide, 1 part School Glue, 3 parts water |
