在LDS中打开
Study Stamps
操作方法
LaserPecker
China2024/11/01 19:44 44
Try making cute stamps with Laserpecker LP5! You can laser cut the rubber and do deep engraving.
基本信息
| 机器LP5 |
| 材质塑料 |
| 尺寸50 x 50 mm |
| 制作时间45 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Connect the machine and open the file. Begin by placing a piece of 2mm rubber on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting at the same time.
After the engraving is complete, use a toothbrush and cleaning agent to clean the dust from the surface, and finally attach it to the stamp base.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质塑料 |
| 分辨率2 K |
| 功率50% |
| 深度70% |
| 雕刻次数1 |
| 模块类型20W 450nm |
设置 2
| 雕刻方式线条雕刻 |
| 工艺材质塑料 |
| 功率70% |
| 深度80% |
| 雕刻次数100 |
| 模块类型20W 450nm |
12
School
