在LDS中打开
Wooden Earrings
操作方法
digermano
Belgium2024/07/23 22:32 66
1,5mm thick
基本信息
| 机器LP2 |
| 材质木质 |
| 尺寸27 x 34 mm |
| 制作时间2 分钟 |
| 雕刻难度 |
操作说明
步骤 1
You can use the image I put in the description, use Line or Cut mode depending on what application you use.
You will need to repeat the whole process unless you use LP Design Space.
Use the following settings: Power 100, Depth 30, Passes 3.
You can also directly use my G-Code with the same settings. No need to repeat the process.
When done, color as you wish. I got the earrings buckles from Amazon.
Have fun.
设置 1
| 雕刻方式线条雕刻 |
| 工艺材质木质 |
| 功率100% |
| 深度30% |
| 雕刻次数3 |
| 模块类型5 W 450 nm |
| 其他参数I used 1.5mm thick plywood. 2 passes are normally enough, but I rather use 3 to be sure everything is properly cut. |
12
我的手工日常
生日礼物
DIY拼装
好物分享
切割
earring
