Cat Bottle, Turtle Bottle

操作方法

Bob's LP4

United States2024/05/01 06:15 10

My wife likes bottles - Borjomi bottles in particular. I've been playing with engraving bottles for quite a while and I have finally been able to get a good dark black engraving on a glass bottle. This is nothing new, except nobody ever told me how much TiO2 to use.

基本信息

机器LP4

材质玻璃

尺寸150 x 213 mm

材料信息Borjomi Mineral Water Glass Bottle, Elmer's School Glue, TiO2 - Earthborn Elements from Amazon (Note All TiO2 is not the same)

制作时间60 分钟

雕刻难度

固件版本 >=655

操作说明

步骤 1 Mix TiO2 solution and Coat the bottle with four coats

It speeds things up a lot to use an electric heater or fan to dry the coating faster.

步骤 2 Engrave

Mount the bottle on the rotary. Move the first section for the engraving to the Design Space. Hide the other two sections. Set the radius, and hide the outline and radius of the selected section. Using the Preview, set the focus and the location to be engraved. Repeat for the middle section, then the top section, The angle of the bottle has to be changed to level the last section.

After the engraving is complete, wash the coating off with warm water. A toothbrush works pretty good for this. You should get a good black engraving.

Another tip for engraving bottles: Brown glass bottles being engraved using the black tempera method MUST be completely filled with water or the bottle will crack.

设置 1

雕刻方式填充雕刻

工艺材质玻璃

分辨率1 K

功率50%

深度90%

雕刻次数1

模块类型10 W 450 nm

其他参数The rotary is required.

设计文件

建议使用V2.5.1版本以上软件

bebdfcd71cb7403abad4f89590b1659c__%3ABorjami%20Bottle%2C%20Turtles.lp2

在LDS中打开下载

美好生活

去购物