Crookes Radiometer Desk Toy
操作方法
elementsbyjon
United Kingdom2024/03/12 20:58 0
Bought a Crookes Radiometer or solar engine from the internet it, had an unatractive plastic base to it.
I cut the base away and turned a new one on my lathe made from Pau Amerello wood.
I then fitted an engraved fibreboard disc in the bottom of the base to complete the project.
Before fitting, I engraved the disc with my logo and information about the science behind the operation of the Radiometer.
I also used a cut layer to cut out the circle.
基本信息
| 机器LP4 |
| 材质木质 |
| 尺寸40 x 40 mm |
| 材料信息The disc is made from Medium Density Fibreboard. The base is made from Pau Amerello wood. |
| 制作时间180 分钟 |
| 雕刻难度 |
操作说明
步骤 1 Drew a 40mm circular image in designspace.
Drew a 40mm circle in designspace.
Added a text box and modified each line of text to follow the contour of the circle
Added my logo to the design.
Aligned the text box, logo and circle.
Grouped the logo and text on the fill layer.
The circle was put in the cut layer.
Laser was set to do both operations in one job.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质木质 |
| 分辨率1 K |
| 功率10% |
| 深度15% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
| 其他参数MDF IS 3mm thick |
设置 2
| 雕刻方式切割雕刻 |
| 工艺材质木质 |
| 功率100% |
| 深度40% |
| 雕刻次数6 |
| 模块类型10 W 450 nm |
| 其他参数Used mutiple passes to reduce smoke damage |
4
我的手工日常
氛围感装饰
