Stamp Pattern
基本信息
| 机器LX1 |
| 材质木质 |
| 尺寸126 x 101 mm |
| 材料信息Rubber |
| 制作时间30 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Open the file and connect the machine. Begin by placing a piece of 2mm thick rubber material on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting.
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
After engraving, use a toothbrush to clean the dust off the surface.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质塑料 |
| 分辨率2 K |
| 功率100% |
| 深度15% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
设置 2
| 雕刻方式线条雕刻 |
| 工艺材质塑料 |
| 功率100% |
| 深度90% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
步骤 2
Open another file. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Once you put the pieces together, it will be fully functional and ready to use.
设置 1
| 雕刻方式线条雕刻 |
| 工艺材质木质 |
| 功率70% |
| 深度80% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
