Engraving on a glass goblet with marking paper.
操作方法
Jantsa
爱沙尼亚2024/02/05 04:55 0
Goblets are generally very delicate, and therefore the font should be rather thinner. During the tests of one of the cups, I was able to break it under the laser because the engraving font was thick, even though the settings were all the same as what I'm sharing. A thinner font is better for engraving on a goblet.
基本信息
| 机器LP4 |
| 材质玻璃 |
| 尺寸50 x 30 mm |
| 制作时间3 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Cut out from marking paper the amount you need for your engraving, put it into the water for 20 seconds and then take out and place it on the glass on the area where you would like to engrave. You can find specific paper in Aliexpress or Amazon. Type in: Colored Laser Engraving Marking Paper. You need to use rotary extension to fix the glass. Then place in settings and engrave. After engraving place the glass to the water for some minutes and the paper will come off easily and you are ready, wipe the glass.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质玻璃 |
| 分辨率2 K |
| 功率67% |
| 深度9% |
| 雕刻次数1 |
| 模块类型10 W 450 nm |
19
圣诞节
感恩节
黑色星期五
新年快乐
美好生活
我的手工日常
生日礼物
生日聚会装饰
下午茶
