Valentine's Day Photo Frame
基本信息
| 机器LX1 |
| 材质木质 |
| 尺寸367 x 221 mm |
| 材料信息3mm Basswood Plank, 1.5mm Basswood Plank |
| 制作时间30 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting.
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质木质 |
| 分辨率2 K |
| 功率30% |
| 深度3% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
设置 2
| 雕刻方式线条雕刻 |
| 工艺材质木质 |
| 功率70% |
| 深度80% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
步骤 2
Begin by placing a 1.5mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting.
This file is only applicable to 1.5mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
As shown in the figure, attach the 1.5mm wooden pieces to the backboard and press it together with the front board. Add the base and the text plate, and the photo frame is ready. Go ahead and put in your photo.
设置 1
| 雕刻方式线条雕刻 |
| 工艺材质木质 |
| 功率70% |
| 深度60% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
设计文件
建议使用V2.5.1版本以上软件
