在LDS中打开
Rock Steak-shaped Coaster
操作方法
LaserPecker
China2024/01/19 15:19 11
engrave your favorite graphics for your rock chopping board!
基本信息
| 机器LP4 |
| 材质石材 |
| 尺寸148 x 85 mm |
| 制作时间20 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Open the file and connect the LP4 and the LP4 Slide Extension. Place the board on the Slide Extension. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters.. Next, you can start engraving.
If you're using different materials, remember to adjust the parameters accordingly.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质石材 |
| 分辨率2 K |
| 功率100% |
| 深度10% |
| 雕刻次数1 |
| 模块类型2 W 1064 nm |
步骤 2
A creative rock steak-shaped coaster is completed.
设计文件
建议使用V2.5.1版本以上软件
9
美好生活
food
