在LDS中打开
Couple Necklace
操作方法
LaserPecker
China2024/01/13 11:10 35
Make a special necklace for your lover.
基本信息
| 机器LP4 |
| 材质金属 |
| 尺寸31 x 10 mm |
| 制作时间5 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Begin by placing blank pendants on the base. Open the file and connect the machine, adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
If you're using different materials, remember to adjust the parameters accordingly.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质金属 |
| 分辨率2 K |
| 功率100% |
| 深度40% |
| 雕刻次数1 |
| 模块类型2 W 1064 nm |
步骤 2
After that, you will get special necklaces.
11
Valentine's Day
