在LDS中打开
Wooden Tulips
操作方法
LaserPecker
China2024/01/12 20:30 5
Let's make some wooden tulips.
基本信息
| 机器LX1 |
| 材质木质 |
| 尺寸224 x 249 mm |
| 制作时间30 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Open the file and connect the machine. Begin by placing a 4mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
This file is only applicable to 4mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
设置 1
| 雕刻方式线条雕刻 |
| 工艺材质木质 |
| 功率80% |
| 深度80% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
步骤 2
Paint the wood pieces with your favorite colors, and after the paint dries, assemble the wood pieces according to the corresponding shapes.
4
Flower
