在LDS中打开
Christmas Gift Box
操作方法
LaserPecker
China2023/12/21 14:14 8
Use the machine to create a Christmas gift box.
基本信息
| 机器LX1 |
| 材质纸 |
| 尺寸282 x 282 mm |
| 材料信息0.6mm Kraft Paper |
| 制作时间30 分钟 |
| 雕刻难度 |
操作说明
步骤 1
First，open the file and connect the machine. As shown in Picture 1 and Picture 2, click the cutting button to place the layer in the line model to the to cut model. This allows you to cut while drawing lines.
Place a piece of kraft paper on the cutting plate, adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
设置 1
| 雕刻方式线条雕刻 |
| 工艺材质牛皮纸 |
| 功率60% |
| 深度10% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
设置 2
| 雕刻方式切割雕刻 |
| 工艺材质牛皮纸 |
| 功率60% |
| 深度80% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
步骤 2
Use the red area shown in Figure 2 to apply glue, and then assemble the box as shown in the pictures. Tie a ribbon on the top, and place an atmosphere lamp inside. The Christmas gift is ready.
步骤 3 Note
If you're using different materials, remember to adjust the parameters accordingly.
6
圣诞节
Gift Box
