在LDS中打开
Shadow Lamp
操作方法
LaserPecker
China2023/12/01 00:25 10
Let's use the machine to make a shadow lamp.
基本信息
| 机器LX1 |
| 材质木质 |
| 尺寸162 x 97 mm |
| 材料信息3mm basswood plank |
| 制作时间20 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Begin by placing a 3mm basswood plank on the cutting pad. Open the file, connect the LX1， adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
设置 1
| 雕刻方式线条雕刻 |
| 工艺材质椴木板 |
| 功率70% |
| 深度80% |
| 雕刻次数1 |
| 加速级别3 |
| 模块类型20 W 450 nm |
步骤 2
As shown in the picture, after painting the color and gluing the wood blocks together, place the candle at the center of the bottom, and the shadow lamp is ready.
步骤 3
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
5
黑色星期五
装饰画
我的手工日常
