在LDS中打开
Halloween Cards
操作方法
LaserPecker
China2023/12/15 11:16 17
Let's make Halloween cards!
基本信息
| 机器LP4 |
| 材质金属 |
| 尺寸53 x 43 mm |
| 制作时间15 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Open the file, place the black card on the base. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质钢 |
| 分辨率2 K |
| 功率100% |
| 深度10% |
| 雕刻次数1 |
| 模块类型2 W 1064 nm |
步骤 2
In this way, you will get a series of Halloween cards, which can be sent to your friends.
步骤 3 Note
If you're using different materials, remember to adjust the parameters accordingly.
设计文件
建议使用V2.5.1版本以上软件
8
Halloween
