在LDS中打开
Puppy Decoration
操作方法
LaserPecker
China2023/12/21 14:14 7
Let's make a wooden dog decoration.
基本信息
| 机器LX1 |
| 材质木质 |
| 尺寸157 x 280 mm |
| 材料信息3mm Basswood plank |
| 制作时间40 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving. Repeat the operation of cutting the remaining dog layers.
设置 1
| 雕刻方式线条雕刻 |
| 工艺材质椴木板 |
| 功率70% |
| 深度80% |
| 雕刻次数1 |
| 加速级别1 |
| 模块类型20 W 450 nm |
步骤 2
Glue the dogs in order, add a frame, and you can hang them in the room for decoration.
步骤 3 Note
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
设计文件
建议使用V2.5.1版本以上软件
13
Decoration
Dog
