在LDS中打开
Motorcycle Flask
操作方法
LaserPecker
China2023/12/08 19:47 22
Engrave a personalized design on your flask.
基本信息
| 机器LP4 |
| 材质金属 |
| 尺寸90 x 72 mm |
| 制作时间2 分钟 |
| 雕刻难度 |
操作说明
步骤 1
Begin by placing a flask on the base. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting. Once everything is set, proceed to start engraving.
设置 1
| 雕刻方式填充雕刻 |
| 工艺材质不锈钢 |
| 分辨率2 K |
| 功率100% |
| 深度1% |
| 雕刻次数1 |
| 模块类型2 W 1064 nm |
步骤 2
After that, you will get a personalized flask.
步骤 3 Note
If you're using different materials, remember to adjust the parameters accordingly.
11
Motorcycle
Flask
