NaN / 0
Cut off all the parts from the drawing
Settings 1
Engraving Method
Cut
Material
Wood
Power
80%
Speed
12 mm/s
Pass
1
Module Type
40 W 450 nm
Ning999
2026/03/15 19:26 3
NaN / 0
A box with a camera shutter-structured coverHow-to
Design FilesLaserPecker Design Space V2.5.1 or above is recommended.
06.dxf
06.lp2
06.svg
Basic Information
Machine
LX2
Material
Wood
Size
300 x 200 mm
Production Time
30 min
Engraving Difficulty
How-to Tutorial
Step 1cut
Step 2
NaN / 0
Please assemble as shown in the diagram. At the connection points marked by the arrows, you may use glue for reinforcement as needed.
Step 3
NaN / 0
Assemble according to the schematic diagram
Step 4
NaN / 0
Assemble the parts completed in the first two steps into a single unit as depicted in the illustration. At the spot marked by the arrow, use wax or WD-40 for lubrication.
Step 5
NaN / 0
As shown in the figure, complete the assembly of the remaining parts
Step 6
NaN / 0
Exploded diagram of parts
box
Say something
0
0
0