Christmas Star Cardboarad
基本情報
| 機器LP2 Plus |
| 材質- |
| サイズ80 x 80 mm |
| 材料情報Standard recycled cardboard from cereal box. Thickness: 0,40mm |
| 彫刻の難易度 |
操作説明
ステップ 1 First Star
First, position the images as shown in the attached image.
The cut line and fold line must be centered.
Then, insert the artwork in the center.
Now, hide the cut line and assign the settings to the line and the image as follows.
Place the cardboard on the laserpecker base and add tape to secure it to the base.
Preview the laserpecker design, then laser it.
After engraving, hide the fold line and the artwork, then show the cut line and assign the cutting parameters.
Preview the laserpecker, then laser it.
Fold the cardboard along the fold lines.
設定 1
| 彫刻方法Picture |
| 加工素材Cardboard |
| 解像度1 K |
| 電力70% |
| 深さ50% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータAssign this setting to the picture |
設定 2
| 彫刻方法Line |
| 加工素材Cardboard |
| 電力70% |
| 深さ50% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータAssign this parameter to fold lines |
設定 3
| 彫刻方法Line |
| 加工素材Cardboard |
| 電力100% |
| 深さ80% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータAssign this parmeter to cut cardboard |
ステップ 2 Second Star
First, position the images as shown in the attached image.
The cut line and fold line must be centered.
Then, insert the artwork in the center.
Now, hide the cut line and assign the settings to the line and the image as follows.
Place the cardboard on the laserpecker base and add tape to secure it to the base.
Preview the laserpecker design, then laser it.
After engraving, hide the fold line and the artwork, then show the cut line and assign the cutting parameters.
Preview the laserpecker, then laser it.
Fold the cardboard along the fold lines.
設定 1
| 彫刻方法Picture |
| 加工素材Cardboard |
| 解像度1 K |
| 電力70% |
| 深さ50% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータAssign this setting to the picture |
設定 2
| 彫刻方法Line |
| 加工素材Cardboard |
| 電力70% |
| 深さ50% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータAssign this setting to the fold lines |
設定 3
| 彫刻方法Line |
| 加工素材Cardboard |
| 電力100% |
| 深さ80% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータAssign this setting to cut lines |
ステップ 3 Glue the Element
Add some glue or double-sided tape on the first and second star like the image, then assemble the two star.
Add a string to the star and position to the Christmas Tree.
Enjoy!
デザインファイル
V2.5.1以降のソフトウェアの使用を推奨します。
