LDSで開く
3D Wood Engraving
ハウツー
LaserPecker
2025/06/21 19:35 97
Simple 3D Wood Engraving, come give it a try!
基本情報
| 機器LP5 |
| 材質木材 |
| サイズ96 x 96 mm |
| 材料情報Canadian Hard Maple |
| 制作時間75 分 |
| 彫刻の難易度 |
操作説明
ステップ 1
Connect the machine and open the file. Begin by placing the canadian hard maple on the base. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
設定 1
| 彫刻方法Picture |
| 加工素材Wood |
| 解像度2 K |
| 電力30% |
| 深さ30% |
| 彫刻回数3 |
| モジュールタイプ20W 450nm |
ステップ 2
After engraving, soak the wood in a 1:1 mixture of bleach and water for about 10 minutes. Rinse thoroughly with clean water and gently brush the surface with a soft brush to remove any residue.
Allow the wood to dry completely. Then, spray a clear wood varnish over the surface. This will enhances the appearance and also protects the wood from moisture, dust and stains.
デザインファイル
V2.5.1以降のソフトウェアの使用を推奨します。
9
Wood
3D
