Layered Raven Art – Basswood & Color Paper Project

How to do it

To create this multilayered raven project, there are 3 ZIP folders available for download:

1. SVG FILES.zip Contains 4 SVG files, each one representing a different layer of the raven artwork.
2. WOOD CUT SETTINGS.zip Includes LaserPecker project file with predefined dimensions and cut settings for the wood layer (base). I used basswood sheet with 2mm thickness, sized 150mm x 100mm.
3. PAPER CUT SETTINGS.zip Contains 4 LaserPecker project files for cutting the paper layers. I used colored paper sheets for all layers: gold and rainbow.

Step-by-step:

1. Open the LaserPecker software.
2. Open one of the SVG, click on the “FILL” tab at the top.
3. Set the dimensions as you prefer, but remember to apply the same size and settings for all wooden layers.
4. Use the engraving/cutting parameters shown in the example image.
5. If you have an air purifier, turn it on, basswood cutting produces smoke.

How to Cut the Colored Paper Layers

1. Cut all of them and glue each one.
2. Use the settings shown in the paper cutting reference images.
3. When placing the sheet paper on the LaserPecker base, make sure the colored side is facing down (check the exemplification image). This helps prevent scorching or damaging the visible surface, resulting in a cleaner finish.
4. After cutting, carefully remove the small details using a needle. Take your time, precision makes a difference!

Assembling the Layers with Glue

1. Apply glue to the each layer.
2. Carefully place it on top of the base layer and align the edges.
3. Repeat the process for each remaining layer, one by one, always aligning carefully before pressing down.
4. Let it dry completely. In the end, you'll have a finished piece just like the one shown in the photo!