LDSで開く
Engraved & Cut Leather Demon Oni Patch
ハウツー
Rovghall
2025/06/13 06:13 20
Used my LaserPecker LP5 to engrave and cut this fierce Oni demon design on faux leather. The deep contrast and precision in the engraving really bring the expression to life, and the cutout makes it perfect for decorative patches or keychains. Great for customizing bags, jackets, or even just as a cool collectible.
基本情報
| 機器LP5 |
| 材質レザー |
| サイズ39 x 46 mm |
| 制作時間5 分 |
| 彫刻の難易度 |
操作説明
ステップ 1
How to Make It:
- Open the LaserPecker software.
- Upload the design and resize it to your preference.
- Apply the settings for "Picture" as shown in the example image.
設定 1
| 彫刻方法Picture |
| 加工素材Leather |
| 解像度2 K |
| 電力10% |
| 深さ22% |
| 彫刻回数1 |
| モジュールタイプ20W 450nm |
ステップ 2 Cutting Steps
Cutting Step:
- Go to the top menu and click on “Outline”. Set the margin between the design and the cut — for this piece, I used a 2mm offset (image nr 1).
- In the “Line” section/layer, apply the cutting settings as shown in the reference image (nr 2).
- Ready to engrave and cut!
設定 1
| 彫刻方法Line |
| 加工素材Leather |
| 電力100% |
| 深さ95% |
| 彫刻回数1 |
| モジュールタイプ20W 1064nm |
| レーザー周波数26 |
ステップ 3 Engraving on the back of the leather
This is how it will look if you engrave on the back side of the leather.
0
demon oni
leather
keychain
patches
