LDSで開く
Customized Permanent Marker – Minimal Gold Touch
ハウツー
Rovghall
2025/06/05 07:34 8
Engraved this white permanent marker using the LaserPecker LP5, adding a simple design with gold clean lines: a feather, arrows, and a subtle geometric shape.
Perfect for gifting or just to personalize your everyday tools.
基本情報
| 機器LP5 |
| 材質プラスチック |
| サイズ14 x 3 mm |
| 制作時間2 分 |
| 彫刻の難易度 |
操作説明
ステップ 1
How to Do It:
- Open the LaserPecker software and drag the 3 minimalist designs into the workspace.
- Arrange the designs in the order you prefer, in this case, I aligned them vertically to fit the marker.
- Select all three designs.
- Click on “Group” in the top menu bar (as shown in the third image).
- Enter the engraving values as shown in the example image.
設定 1
| 彫刻方法Picture |
| 加工素材Plastic |
| 解像度4 K |
| 電力20% |
| 深さ5% |
| 彫刻回数3 |
| モジュールタイプ20W 1064nm |
| レーザー周波数26 |
ステップ 2 Place and align the permanent marker properly on the base of your LaserPecker
How to do it:
1. Place the permanent marker ou pen on the base of your LaserPecker machine.
2. In the software, click Preview to project the blue outline onto the marker.
3. Adjust the permanent marker position until the blue preview lines match the area
4. Once it's aligned correctly, you're ready to engrave!
デザインファイル
V2.5.1以降のソフトウェアの使用を推奨します。
0
marker permanent
minimalist
