LDSで開く
Engraved My LaserPecker USB Drive - Where I Keep All My Projects
ハウツー
Rovghall
2025/06/05 07:15 17
This pen drive came included with my LaserPecker machine, and I use it to store all my engraving projects. I decided to give it a personal touch by engraving the LP logo on it, simple, clean, and functional.
基本情報
| 機器LP5 |
| 材質金属 |
| サイズ24 x 24 mm |
| 制作時間2 分 |
| 彫刻の難易度 |
操作説明
ステップ 1
How to do it:
- Open the LaserPecker software and go to the left sidebar - click on the Clipart icon. From there, select the LaserPecker logo (as shown in the first image).
- Then, go to the top Edit tab and click on Auto Cropping, confirm with OK.
- Insert the engraving values exactly as shown in the image (power/speed/lines).
設定 1
| 彫刻方法Picture |
| 加工素材Metal |
| 解像度2 K |
| 電力15% |
| 深さ8% |
| 彫刻回数1 |
| モジュールタイプ20W 1064nm |
| レーザー周波数26 |
ステップ 2 Place and align the USB Drive properly on the base of your LaserPecker
How to do it:
1. Place the USB Drive on the base of your LaserPecker machine.
2. In the software, click Preview to project the blue outline onto the USB area.
3. Adjust the USB position until the blue preview lines match the area
4. Once it's aligned correctly, you're ready to engrave!
3
laserpecker
usb drive
custom
