LDSで開く
Hand of the Oni – Aluminum Engraving
ハウツー
Rovghall
2025/05/16 18:17 9
Engraved and laser-cut this piece on 1mm anodized aluminum using my LaserPecker LP5. The artwork features an Oni mask surrounded by flowers, emerging from an open hand holding a butterfly. You can use this piece as a keychain, stick it on your fridge, or as a decorative accent anywhere you like.
基本情報
| 機器LP5 |
| 材質金属 |
| サイズ63 x 124 mm |
| 材料情報1mm anodized black aluminum |
| 制作時間30 分 |
| 彫刻の難易度 |
操作説明
ステップ 1 How to Make It
How to Make It:
- Open the LaserPecker software.
- Upload the design and resize it to your preference.
- Go to the “Effect” tab, select “Dithered”, and invert the image.
- Apply the settings for "Picture" as shown in the example image.
設定 1
| 彫刻方法Picture |
| 加工素材Metal |
| 解像度2 K |
| 電力12% |
| 深さ1% |
| 彫刻回数1 |
| モジュールタイプ20W 1064nm |
| レーザー周波数26 |
ステップ 2 Cutting Steps
Cutting Step:
- Go to the top menu and click on “Outline”. Set the margin between the design and the cut — for this piece, I used a 2mm offset.
- In the “Line” section/layer, apply the cutting settings as shown in the reference image.
- Ready to engrave and cut!
0
Decorative Painting
dark art
Cutting
Oni art
