Eternal Love
基本情報
操作説明
ステップ 1 Set-up fixture for engraving the tile
Clean the tile with alcohol. Use two of the L shaped brackets to hold the ceramic tile firmly in place, but arranged so that the tile can be removed and replaced in EXACTLY the same location.
ステップ 2 Engrave Stem
Open TRI COLOR ROSE in Design Space.
Hide all but the stem, and pre-view.
Mark the outline of the preview with a felt tip pen.
Remove the tile, coat the area inside the outline with two coats of TiO2, applied with a soft brush and let dry.
Replace the tile in the fixture. Set the engraving parameters to 50% power, depth 88, and engrave the stem (black)
Remove the tile, and wash off the excess TiO2
設定 1
| 彫刻方法Fill |
| 加工素材Ceramics |
| 解像度1 K |
| 電力50% |
| 深さ88% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータTiO2 solution, 1 part TiO2, 1 part School Glue, 3 parts water |
ステップ 3 Rose Petals
Open TRI COLOR ROSE in Design Space.
Place the tile in the fixture such that it is in EXACTLY the same location
Hide all but the rose petals, and pre-view.
Mark the outline of the preview with a felt tip pen.
Remove the tile, coat the area inside the outline with a coat of copper oxide, applied with a soft brush and let dry.
Replace the tile in the fixture. Set the engraving parameters to 39% power, depth 89, and engrave the petals (copper)
Remove the tile, and wash of the excess Copper Oxide
NOTE: If there are unacceptable brush mark in the engraved image, apply another THIN coat of copper oxide and repeat.
設定 1
| 彫刻方法Fill |
| 加工素材Ceramics |
| 解像度1 K |
| 電力39% |
| 深さ89% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータCopper Oxide Solution, 1 part Copper Oxide, 1 part School Glue, 3 parts water |
ステップ 4 Green Glaze and Blue text
Open TRI COLOR ROSE in Design Space.
Place the tile in the fixture such that it is in EXACTLY the same location
Hide all but the leaves, and pre-view.
Mark the outline of the preview with a felt tip pen.
Hide all but the text, and pre-view
Mark the outline of the preview with a felt tip pen.
Remove the tile, coat the area inside the leaves outline with a VERY THIN coat of green glaze, applied with a soft brush and let dry.
Coat the area of the text outline with two coats of Cobalt oxide solution, letting dry between coats.
Hide all but the leaves, and engrave 89D, 6P
Hide all but the text, and engrave 90D, 39P
Remove the tile, and wash off the glaze and cobalt oxide with water.
FINISHED!!
設定 1
| 彫刻方法Fill |
| 加工素材Ceramics |
| 解像度1 K |
| 電力6% |
| 深さ89% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータSAX Ivy Green Glaze from Amazon |
設定 2
| 彫刻方法Fill |
| 加工素材Ceramics |
| 解像度1 K |
| 電力6% |
| 深さ89% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータSAX Ivy Green Glaze from Amazon |
設定 3
| 彫刻方法Fill |
| 加工素材Ceramics |
| 解像度1 K |
| 電力39% |
| 深さ90% |
| 彫刻回数1 |
| モジュールタイプ10 W 450 nm |
| その他のパラメータCobalt Oxide Solution, 1 part Copper Oxide, 1 part School Glue, 3 parts water |
