LDSで開く
Wooden Earrings
ハウツー
digermano
2024/07/23 22:32 66
1,5mm thick
基本情報
| 機器LP2 |
| 材質木材 |
| サイズ27 x 34 mm |
| 制作時間2 分 |
| 彫刻の難易度 |
操作説明
ステップ 1
You can use the image I put in the description, use Line or Cut mode depending on what application you use.
You will need to repeat the whole process unless you use LP Design Space.
Use the following settings: Power 100, Depth 30, Passes 3.
You can also directly use my G-Code with the same settings. No need to repeat the process.
When done, color as you wish. I got the earrings buckles from Amazon.
Have fun.
設定 1
| 彫刻方法Line |
| 加工素材Wood |
| 電力100% |
| 深さ30% |
| 彫刻回数3 |
| モジュールタイプ5 W 450 nm |
| その他のパラメータI used 1.5mm thick plywood. 2 passes are normally enough, but I rather use 3 to be sure everything is properly cut. |
12
My Handmade Daily
Birthday Gift
DIY Assembly
Sharing Good Finds
Cutting
earring
