Cat Bottle, Turtle Bottle

ハウツー

Bob's LP4

2024/05/01 06:15 10

My wife likes bottles - Borjomi bottles in particular. I've been playing with engraving bottles for quite a while and I have finally been able to get a good dark black engraving on a glass bottle. This is nothing new, except nobody ever told me how much TiO2 to use.

基本情報

機器LP4

材質ガラス

サイズ150 x 213 mm

材料情報Borjomi Mineral Water Glass Bottle, Elmer's School Glue, TiO2 - Earthborn Elements from Amazon (Note All TiO2 is not the same)

制作時間60 分

彫刻の難易度

ファームウェアバージョン >=655

操作説明

ステップ 1 Mix TiO2 solution and Coat the bottle with four coats

It speeds things up a lot to use an electric heater or fan to dry the coating faster.

ステップ 2 Engrave

Mount the bottle on the rotary. Move the first section for the engraving to the Design Space. Hide the other two sections. Set the radius, and hide the outline and radius of the selected section. Using the Preview, set the focus and the location to be engraved. Repeat for the middle section, then the top section, The angle of the bottle has to be changed to level the last section.

After the engraving is complete, wash the coating off with warm water. A toothbrush works pretty good for this. You should get a good black engraving.

Another tip for engraving bottles: Brown glass bottles being engraved using the black tempera method MUST be completely filled with water or the bottle will crack.

設定 1

彫刻方法Fill

加工素材Glass

解像度1 K

電力50%

深さ90%

彫刻回数1

モジュールタイプ10 W 450 nm

その他のパラメータThe rotary is required.

デザインファイル

V2.5.1以降のソフトウェアの使用を推奨します。

bebdfcd71cb7403abad4f89590b1659c__%3ABorjami%20Bottle%2C%20Turtles.lp2

LDSで開くダウンロード

Good Life

今すぐ購入