Candy Boxes
基本情報
| 機器LX1 |
| 材質紙 |
| サイズ180 x 140 mm |
| 制作時間20 分 |
| 彫刻の難易度 |
操作説明
ステップ 1
Open the file and connect the machine. As shown in Picture 1 and Picture 2, click the cutting button to place the layer in the line model to the to cut model. This allows you to cut while drawing lines.
ステップ 2
Begin by placing the paper on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
If you're using different materials, remember to adjust the parameters accordingly.
設定 1
| 彫刻方法Line |
| 加工素材Paper |
| 電力20% |
| 深さ1% |
| 彫刻回数1 |
| 加速レベル1 |
| モジュールタイプ20 W 450 nm |
設定 2
| 彫刻方法Cut |
| 加工素材Paper |
| 電力100% |
| 深さ10% |
| 彫刻回数1 |
| 加速レベル1 |
| モジュールタイプ20 W 450 nm |
ステップ 3
Fold the paper box according to the line position to create creases. Then, apply glue to the marked red areas in the picture and paste it, Fold the bottom. After placing the prepared gifts inside, tie it with a thin twine.
ステップ 4
Place the cork sticker on the base, use the Text tool to select your favorite font to enter the name, verify the size, ensure that the preview graphic is in the position you want, and then start engraving. Attach the engraved sticker to the finished paper box.
設定 1
| 彫刻方法Fill |
| 加工素材Wood |
| 解像度1 K |
| 電力1% |
| 深さ1% |
| 彫刻回数1 |
| 加速レベル1 |
| モジュールタイプ20 W 450 nm |
