LDSで開く
Christmas Gift Box
ハウツー
LaserPecker
2023/12/21 14:14 8
Use the machine to create a Christmas gift box.
基本情報
| 機器LX1 |
| 材質紙 |
| サイズ282 x 282 mm |
| 材料情報0.6mm Kraft Paper |
| 制作時間30 分 |
| 彫刻の難易度 |
操作説明
ステップ 1
First，open the file and connect the machine. As shown in Picture 1 and Picture 2, click the cutting button to place the layer in the line model to the to cut model. This allows you to cut while drawing lines.
Place a piece of kraft paper on the cutting plate, adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
設定 1
| 彫刻方法Line |
| 加工素材Kraft paper |
| 電力60% |
| 深さ10% |
| 彫刻回数1 |
| 加速レベル1 |
| モジュールタイプ20 W 450 nm |
設定 2
| 彫刻方法Cut |
| 加工素材Kraft paper |
| 電力60% |
| 深さ80% |
| 彫刻回数1 |
| 加速レベル1 |
| モジュールタイプ20 W 450 nm |
ステップ 2
Use the red area shown in Figure 2 to apply glue, and then assemble the box as shown in the pictures. Tie a ribbon on the top, and place an atmosphere lamp inside. The Christmas gift is ready.
ステップ 3 Note
If you're using different materials, remember to adjust the parameters accordingly.
6
Christmas
Gift Box
