Turkey Ornament
基本情報
| 機器LX1 |
| 材質木材 |
| サイズ182 x 86 mm |
| 制作時間10 分 |
| 彫刻の難易度 |
操作説明
ステップ 1
Open the file, click this cutting button to place the layers in the line model, except for the perfectly round layer, into the to cut model. This allows you to cut the turkey tail while drawing a line in the middle.
Click on the eye button to hide the turkey's head and body first. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
設定 1
| 彫刻方法Line |
| 加工素材Basswood plank |
| 電力100% |
| 深さ3% |
| 彫刻回数1 |
| 加速レベル1 |
| モジュールタイプ20 W 450 nm |
設定 2
| 彫刻方法Cut |
| 加工素材Basswood plank |
| 電力70% |
| 深さ80% |
| 彫刻回数1 |
| 加速レベル1 |
| モジュールタイプ20 W 450 nm |
ステップ 2
After the cutting in the previous step is completed, unhide the head and body layers, and hide the tail and mouth layers. Switch to a 3mm black walnut wood board, repeat the above operation, and cut the turkey head and body down. After assembly, you will have a turkey ornament.
設定 1
| 彫刻方法Cut |
| 加工素材Black walnut |
| 電力70% |
| 深さ80% |
| 彫刻回数1 |
| 加速レベル1 |
| モジュールタイプ20 W 450 nm |
ステップ 3 Note
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
